Easy@Home VC9389, User Manual, Page: 12 / 19

Using the carpet cleaner
12
NOTICE!
Risk of damage!
Using the carpet cleaner without the water solution tank in place or
with a wrong solution may damage the carpet cleaner.
− Always make sure that the water solution tank is properly in
place before using the carpet cleaner.
− Do not use any solvents, cleaners with strong acidic or strong
alkali formulas, or any type of cleaning solution not specifically
for use in carpet cleaning machines.
Only use suitable (low-foaming) carpet cleaning solution. Using
incorrect solutions may cause excess foaming, which will prevent the
carpet cleaner from working effectively.
1. Unplug the carpet cleaner.
2. While holding on to the water solution tank 4 , lift the water
solution tank handle 9 upwards.
3. Tilt the water solution tank away from the carpet cleaner and
remove it.
4. Unscrew the water solution tank cap 3 by turning it
counterclockwise.
5. Add cleaning solution 15 , making sure to follow the instructions
on the bottle.
6. Fill the remainder of the water solution tank with warm tap
water (max. 40 °C (104 °F)) and replace the water solution tank
cap.
Make sure to not exceed the max fill level.
7. Place the water solution tank back into position by pushing it down and into the
carpet cleaner.
8. Push the water solution tank handle down until it clicks, locking into place.
• A bottle of carpet cleaning solution is included. Once this has
been used, most commercially available low foaming carpet
cleaning solutions may be used. Always read the manufacturer’s
instructions before use.
• Carpet cleaning solution cannot be ordered from our customer
service department.