First use
10
First use
Checking the carpet cleaner and package contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a sharp
knife or other pointed object, you may quickly damage the carpet
cleaner.
− For this reason, be very careful when opening it.
1. Take the carpet cleaner out of the packaging.
2. Check to make sure that all parts are included (see
Fig. A
and
B
).
3. Check whether the carpet cleaner or individual parts are damaged. If this is the
case, do not use the carpet cleaner. Contact the manufacturer via the service
address indicated on the warranty card.
Carpet cleaner assembly
CAUTION!
Risk of injury!
Improper handling of the carpet cleaner may cause injury.
− Do not plug the carpet cleaner in until it is fully assembled.
− Do not operate the carpet cleaner without the handle being
firmly screwed into place.
1. Set the carpet cleaner in an upright position.
2. Place the handle
1
firmly onto the main body of the carpet cleaner.
3. Make sure that the mains cord clip
17
is on the same side as the mains cord
hooks
12
.
4. Drive one crosshead screw
14
into each side of the handle and fasten them
snugly.
Do not overtighten the screws, as this could strip the screw holes.
Summary of Contents for VC9389
Page 3: ...3 A 1 2 3 5 6 7 8 10 9 4...
Page 4: ...4 B 11 12 13 16 17 14 15...
