Troubleshooting
USA
AFTER SALES SUPPORT
16
USA
1-800-886-8506
Troubleshooting
Fault
Possible cause
Solution
Hair dryer doesn't
work.
The power plug is
not connected to a
socket.
Insert the power plug in a socket.
The FI safety switch
was triggered by
fault current.
Make sure that the mains connec-
tion line is not damaged and that
no moisture has penetrated the
housing. If this is not the case, push
the “RESET” button
10
to release
the FI safety switch again. If the FI
safety switch triggers again, have a
qualified technician check the hair
dryer.
The heating wires
are glowing red.
The air supply is
blocked.
Clean the air inlet grille as de-
scribed in the chapter “Cleaning
and storage”.
The hair dryer
doesn't work; it
switches off during
operation.
The air inlet is
obstructed. The in-
tegrated overheat
protection inter-
rupted the voltage
supply.
Switch the hair dryer off and pull
the power plug out of the socket.
Let it cool off completely and then
clean the air-inlet grille.
If you encounter faults not listed here, please contact our customer service
department at the service address indicated on the warranty card. You can
request the instruction manual in PDF format from our customer service
department.
Technical data
Model:
RHT 2014
Supply voltage:
110 – 120 V~ / 220 – 240 V~
Frequency
60 Hz/50 Hz
Output:
1200 W/1600 W
Dimensions when folded out:
Dimensions when folded up:
8.3" x 9.8" (21 cm x 25 cm) (W x H)
8.3" x 4.7" (21 cm x 12 cm) (W x H)
Article number:
92347
dryer.
Clean the air inlet grille as de
Clean the air inlet grille as de
scribed in the chapter “Cleaning
scribed in the chapter “Cleaning
and storage”.
and storage”.
The air inlet is
The air inlet is
obstructed. The in
obstructed. The in
tegrated overheat
tegrated overheat
protection inter
protection inter
rupted the voltage
rupted the voltage
supply.
supply.
Switch the hair dryer off and pull
Switch the hair dryer off and pull
If you encounter faults not listed here, please contact our customer service
If you encounter faults not listed here, please contact our customer service
department at the service address indicated on the warranty card. You can
department at the service address indicated on the warranty card. You can
the FI safety switch again. If the FI
the FI safety switch again. If the FI
safety switch triggers again, have a
safety switch triggers again, have a
qualified technician check the hair
qualified technician check the hair
dryer.
dryer.
Clean the air inlet grille as de
rupted the voltage
rupted the voltage
Clean the air inlet grille as de
scribed in the chapter “Cleaning
scribed in the chapter “Cleaning
and storage”.
and storage”.
Switch the hair dryer off and pull
Switch the hair dryer off and pull
the power plug out of the socket.
the power plug out of the socket.
Let it cool off completely and then
Let it cool off completely and then
clean the air-inlet grille.
clean the air-inlet grille.
If you encounter faults not listed here, please contact our customer service
If you encounter faults not listed here, please contact our customer service
department at the service address indicated on the warranty card. You can
department at the service address indicated on the warranty card. You can
request the instruction manual in PDF format from our customer service
request the instruction manual in PDF format from our customer service
Summary of Contents for RHT 2014
