Cleaning
USA
AFTER SALES SUPPORT
14
USA
1 877-386-8264
www.monolith-support.com
Laminator
The heating rollers will automatically pull the laminating pouch in and move
it to the laminating pouch output slot
5
on the front of the laminator. Don’t
use force to pull out the laminating pouch.
4. Remove the laminating pouch and let it cool off briefly on a flat surface.
• If necessary, you can cut off excessive material after it has
cooled off.
• Repeat the process if the laminating pouch has not adequately
adhered to the document.
5. Move the ON/OFF switch to “
OFF
” (
AAAAA
) to switch the laminator off.
Removing a jammed laminating pouch
The laminator is equipped with an antiblocking system. If the laminating pouch
was not inserted straight or it becomes jammed in the laminator, proceed as
follows:
1. Move the ABS switch
7
towards the laminating pouch infeed slot
2
and
hold it down.
2. Pull the laminating pouch
6
out of the laminator.
It is recommended you pull the laminating pouch out in the direc-
tion of its larger end.
You can place the document in a new laminating pouch and laminate it again.
Cleaning
WARNING!
Burn hazard!
The laminator will become hot during operation.
− Always let the laminator cool off completely before you
clean it.