First use
USA
AFTER SALES SUPPORT
12
USA
1 877-386-8264
www.monolith-support.com
Laminator
First use
Checking the laminator and product contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointy object, you may quickly damage
the laminator.
− Be very careful when opening.
1. Take the laminator out of the packaging.
2. Check whether the laminator or the individual parts exhibit damage. If this
is the case, do not use the laminator. Contact the manufacturer at the ser-
vice address specified on the warranty card.
3. Check to make sure that the delivery is complete (see
fig. A
).
Setting up the laminator
1. Position the laminator so that there is enough space to insert a laminating
pouch
6
. Do not position the laminator directly in front of a wall or other
objects.
2. Connect the power plug to a properly installed socket with a protective con-
ductor (120 V = house connection).
Activating / deactivating the laminator
1. Move the ON/OFF switch
4
to “
ON
” (―) to switch the laminator on.
The ready indicator
1
will turn from dark blue to red once the
laminator has reached the correct temperature for lamination.
The preheating time may vary depending on the ambient tem-
perature and air humidity.
2. Move the ON/OFF switch to “
OFF
” (
AAAAA
) to switch the laminator off.
