Operation
16
16. Turn on the white unit LED color changing night light by pressing the ‘LED On/Off’
button (p. 4, fig. 5
15
). The LED lights will change continuously in the following
order;
• Purple, dark blue, light blue, green, yellow, orange and red
To turn it off, press and hold the button for 2 seconds.
17. When the humidifier runs out of water, the power light (p. 4, fig. 5
13
) will turn
red, and the mist output will stop. This is a safety feature to prevent the humidifier
from possibly overheating and damaging the nebulizer (p. 4, fig. 4
7
). This
safety feature uses a water level sensor (p. 4, fig. 4
9
) to stop the nebulizer
once the water level sinks below the required level in the water basin.
18. Turn the humidifier off and unplug before removing and refilling the water tank.
Setting the correct humidity output
Adjust the mist control so that the mist rises up and gets absorbed by the room
air. Do not turn on too high an output as the mist cannot be absorbed by the air
and accumulates on the surface around the humidifier. If the humidifier is placed
near a fan or air conditioning outlet, the mist may be forced down by the foreign
air stream. Change the location of the humidifier or reduce the output of the other
room conditioning appliances.
Correct
Incorrect
Summary of Contents for HTJ-2060
Page 37: ...Notes 39 Notes...
Page 38: ...Notes 40...