Easy Washer
®
33
English
GENERAL MAINTENANCE
WARNING:
ALWAYS DISCONNECT THE PLUG FROM THE POWER SUPPLY BE-
FORE ANY MAINTENANCE IS STARTED.
1. INLET WATER FILTER
Check the inlet water filter inside
the water tank before filling with water. Clean water filter
screen if it is clogged or replace it if the screen is damaged.
2. NOZZLE CLOGGED:
A clogged nozzle will cause the
operating pressure to be too high causing the portable washer to surge.
If this happens turn unit off and unplug pressure washer:
Unplug power supply, pull trigger on spray nozzle handle to relieve pressure,
remove nozzle from hose.
Clean the spray nozzle with the nozzle cleaning tool. (See Diagrams 1&2 below).
Flush wand assembly backwards with water or compressed air.
If pressure is still too high, repeat steps 1-2.
3. LUBRICATION:
No lubrication is required for this pump. Silicone grease may be
added to hose connector O-rings if connecting becomes difficult.
4.
Add some silicone grease to the metal part of the spray nozzle if it has not been
used for a long time.
STEP 1:
Pull back quick
coupling and detach
the nozzle from the
hose.
STEP 2:
Clean the nozzle with the
tool. Remove any dirt
from the nozzle and rinse
Unscrew end of power
cord adaptor to remove
old fuse. Discard and
replace with new fuse.
TO CLEAN SPRAY NOZZLE
REPLACE FUSE
Summary of Contents for EX-1036 PLUS
Page 113: ......
