If you want to dispose of the tool yourself, the battery must be
removed as
describe above and disposed of in accordance with local regulations. Place the
battery in a suitable packing to ensure that the terminals can not be
short-circuited. Take the batteries to a local recycling station.
General safety instructions
WARNING!
When using electric tools, basic safety precautions,
including the following, should always be followed to reduce the risk of fire,
electric shock and personal injury.
Read all these instructions before operating this product and save these
instructions.
1. Keep work area clean.
- Cluttered area and benches invite injuries.
2. Consider work area environment.
- Do not expose the tool to rain. Do not use the tool in damp or wet locations.
Keep work area well lit. Do not use the tool where there is risk to cause fire or
explosion.
3 . Keep children away.
- Do not let visitors touch the tool or extension cord. All visitors should be kept
away from work area.
4. Store idle tools.
- When not in use, tools should be stored in a dry, high or locked up place, out of
reach of children.
6. Do not force the tool.
- It will do the job better and safe at the rate for which it was intended.
7. Dress properly.
- Do not wear loose clothing or jewelry, they can be caught in moving parts.
Rubber gloves and non-skid footwear are recommended when working outdoors.
Wear protecting hair covering to contain long hair.
8. Use safety glasses.
- Also use face or dust mask if the cutting operation is dusty.
9. Do not overreach.
- Keep proper footing and balance at all times.
10. Stay alert.
- Watch what you are doing. Use common sense. Do not operate tool when you
are tired.
11. Check damaged parts.
- Before further use of the tool, a guard or other part that is damaged should be
carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment of moving parts, free running of moving
parts, breakage of parts, mounting and any other conditions that may affect its
operation. A guard or other part that is damaged should be properly repaired or
replaced by an authorized service centre unless otherwise indicated in this
instruction manual. Have defective switches replaced by an authorized service
facility. Do not use the tool if the switch does not turn it on and off.
12. Warning.
- The use of any accessory or attachment, other than those recommended in this
instruction manual, may present a risk of personal injury.
13. Have your tool repaired by a qualified person.
- This electric tool is accordance with the relevant safety requirements. Repairs
should only be carried out by qualified persons using original spare parts,
otherwise this may result in considerable danger to the use.
Operation instruction:
1.
Installation of the battery
(1)
Open battery door at the back of the unit.
(2)
Attach a 9Volt battery to the connector.
(3)
Put the battery into the compartment.
(4)
Close battery compartment door.
2.
Operational instruction
