16
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
STICK WELDING SET-UP AND OPERATION
ELECTRIC SHOCK CAN CAUSE INJURY OR DEATH!
•
Improper use of an electric Welder can cause electric shock, injury and death! Read all precautions described in the Welder
Manual to reduce the possibility of electric shock.
•
Disconnect Welder from power supply before assembly, disassembly or maintenance of the torch, contact tip and when installing
or removing nozzles.
•
Always wear dry, protective clothing and leather welding gloves and insulated footwear. Use suitable clothing made from durable
flame-resistant material to protect your skin.
•
Always operate the Welder in a clean, dry, well ventilated area. Do not operate the Welder in humid, wet, rainy or poorly ventilated
areas.
•
The electrode and work (or ground) circuits are electrically “hot” when the Welder is on. Do not allow these “hot” parts to come
in contact with your bare skin or wet clothing.
•
Separate yourself from the welding circuit by using insulating mats to prevent contact from the work surface.
•
Be sure that the work piece is properly supported and grounded prior to beginning an electric welding operation.
•
Always attach the ground clamp to the piece to be welded and as close to the weld area as possible. This will give the least
resistance and best weld.
WELDING SPARKS CAN CAUSE FIRE OR EXPLOSION!
•
Electric welding produces sparks which can be discharged considerable distances at high velocity igniting flammable or
exploding vapors and materials.
•
Do not operate electric arc Welder in areas where flammable or explosive vapors are present.
•
Do not use near combustible surfaces. Remove all flammable items within 35 feet of the welding area.
•
Always keep a fire extinguisher nearby while welding.
•
Use welding blankets to protect painted and or flammable surfaces; rubber weather-stripping, dash boards, engines, etc.
•
If other persons or pets are in the area of welding, use welding screens to protect bystanders from sparks.
ELECTROMAGNETIC FIELDS CAN BE A HEALTH HAZARD!
•
The electromagnetic field that is generated during arc welding may interfere with various electrical and electronic devices such
as cardiac pacemakers. Anyone using such devices should consult with their physician prior to performing any electric welding
operations.
•
Exposure to electromagnetic fields while welding may have other health effects which are not known.
ARC RAYS CAN BURN!
•
Arc rays produce intense ultraviolet radiation which can burn exposed skin and cause eye damage. Use a shield with the proper
filter (a minimum of #11) to protect your eyes from sparks and the rays of the arc when welding or when observing open arc
welding (see ANSI Z49.1 and Z87.1 for safety standards).
•
Use suitable clothing made from durable flame-resistant material to protect your skin.
•
If other persons or pets are in the area of welding, use welding screens to protect bystanders from sparks and arc rays.
FUMES AND WELDING GASES CAN BE A HEALTH HAZARD!
•
Fumes and gasses released during welding are hazardous. Do not breathe fumes that are produced by the welding operation.
Wear an OSHA-approved respirator when welding.
•
Always work in a properly ventilated area.
•
Never weld coated materials including but not limited to: cadmium plated, galvanized, lead based paints.
