To order parts and supplies, call 1-800-345-1178 or visit www.eastwood.com
5
COMPONENTS AND CONTROLS
1.
Ground cable and torch access hole.
2.
Opening for torch electrical cable.
3.
Power
switch.
4.
Voltage control knob.
5.
Wire speed, feed rate adjust knob.
6.
Latch.
7.
Power
Cord.
8.
Reset overload protective device –
the protector will cut off the circuit if
the welding machine is in excess of
the maximum load, after which the
switch must be manually reset.
9.
Shielding gas inlet fi tting.
10.
Wire feed tension roller.
11.
Wire spool mount spindle.
12.
Wing screw to fasten the welding torch cable.
13.
Positive (+) and negative (-) output terminals.
14.
Control cable connection of the welding torch.
FIG. B
FIG. B
7
9
11
14
13
12
10
8
4
3
5
1
2
6
