To order parts and supplies: 800.343.9353 >> eastwood.com
5
• Place the stripped end of the wire into the
smaller “U” feature of the Connector with the
Silicone Connector Wire Seal nested in the
larger “U”
(FIG 5)
.
• Slowly apply pressure to the handles and
pull them together. The moveable handle will
ratchet in as it is closed.
• Close handles completely and squeeze until
the ratchet releases.
• Remove crimped terminal assembly from the
tool
(FIG 6)
.
• Slide the crimped Male or Female terminal
assembly into the rear of the corresponding
Housing
(FIG 7)
.
• Continue to push inward until the Silicone
Wire Seal is fully seated and the retaining
wings of the terminal click into place within
the Housing
(FIG 8)
.
• The terminal crimp and installation is now
complete and the process is repeated for
additional terminals if required.
FIG. 5
Keep fingers away from moving parts of
the Crimp Tool to avoid being pinched.
FIG. 6
FIG. 7
FIG. 8
Push In
✓
