To order parts and supplies: 800.343.9353 >> eastwood.com
5
MAINTENANCE
• Add several drops of air tool oil before each use by dropping directly into the air inlet.
• If tool is to be unused for an extended period, add 10 drops of air tool oil directly to the air inlet,
rotate the tool motor by hand several times to distribute the oil throughout the motor then store
the tool, handle up.
PROBLEM
CAUSE
CORRECTION
Tool doesn’t
respond to
Paddle
depression
Insufficient vol-
ume of air (CFM)
to operate tool.
Verify sufficient air supply to tool.
(3.1 CFM @ 90 PSI minimum requirement)
Moisture or other
contamination in
air supply
Check for moisture in air line and tool air inlet.
Tool perfor-
mance is slow
or sluggish
Insufficient vol-
ume of air (CFM)
to operate tool
Verify sufficient air supply to tool.
(3.1 CFM @ 90 PSI minimum requirement).
Moisture or other
contamination in
air supply
Check for moisture in air line and tool air inlet.
Air Motor is lack-
ing lubrication
Stop use immediately and add air tool oil
directly to air inlet.
Tool is exces-
sively noisy/
emits high
pitched sound
Air Motor is lack-
ing lubrication
Stop use immediately and add air tool oil
directly to air inlet.
TROUBLESHOOTING
