Eastwood 13542 Instructions Manual Download Page 19 | Manualshive

Page: 19 / 20

background image

To order parts and supplies: 800.343.9353 >> eastwood.com

19

BUFF COMPOUND SELECTION

#32030 EMERY

(Dark Gray)

For fast cutting on iron, steel and other hard metals to remove scratches, rust, corrosion
burrs etc. Use with Sisal wheels. Do Not use on gold or silver.

#32031 STAINLESS

(Light Gray)

For buffing stainless and other steels, chromium, nickel plate and some harder plastics. Use
with Spiral or Ventilated buffs. Do Not use on gold or silver.

#32032 TRIPOLI

(Brown)

For buffing all base metals. Use on brass, aluminum, pewter, copper etc. Also plated sur-
faces. Use with Spiral or Ventilated wheels. Do Not use on gold or silver.

#32033 WHITE ROUGE

(White)

For final coloring on metal. Produces a brilliant high shine. Removes light scratches. Use with
Loose or Canton Flannel buff wheels.

#32034 JEWELERS ROUGE

(Red)

For the highest finish on gold, silver and other precious metals. Use with Canton Flannel or
Felt buff wheels for best results.

#32035 PLASTIC

(Blue)

For cut and coloring on hard plastics. Do Not use on soft or low melting point plastics like
polyethylene. For cut-down, use Spiral Sewn buff wheel. For final high luster, use Flannel or
String buffs.

BUFF WHEELS

#13061

10” Sisal Buffing Wheel for 3/4” arbor

#13060

8” Sisal Buffing Wheel for 5/8” arbor

#13038

10” Spiral Sewn Buffing Wheel for 3/4” arbor

#13033

8” Spiral Sewn Buffing Wheel for 5/8” arbor

#13046

10” Canton Flannel Buffing Wheel for 5/8” arbor

#13058

8” Canton Flannel Buffing Wheel for 3/4” arbor

#13041

10” Loose Section Buffing Wheel for 3/4” arbor

#13044

8” Loose Section Buffing Wheel for 5/8” arbor

#13030

10” Cotton String Buffing Wheel for 3/4" arbor

«
...
17
18
19
20
»

Summary of Contents for 13542





















Reviews:

No comments

Related manuals for 13542

Brand: ABB Pages: 8

Brand: Briggs & Stratton Pages: 20

OMEGAFLEX FPU5-MT-110

Brand: Omega Engineering Pages: 83

Brand: IMS Pages: 6

Brand: Stark Pages: 14

Applied Motion Products TSM23XIP

Brand: Moons' Pages: 2

Brand: Habasit Pages: 20

Brand: O.S. engine Pages: 18

Revenge CTM Series

Brand: Absima Pages: 3

Brand: Volvo Pages: 11

Brand: Volvo Pages: 36

Brand: Volvo Pages: 48

Brand: CAME Pages: 44

Brand: Honda Pages: 59

Brand: Honda Pages: 32

Brand: Honda Pages: 100

Brand: Barrus Pages: 97

Brand: DLE Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands