To order parts and supplies: 800.343.9353 >> eastwood.com
9
OPERATION
#51460, 1 HP, DUAL-SPEED MOTOR
• Check that the Rocker Switch is in the
left “OFF” Position
(FIG 5)
.
• Turn Rotary Switch to the Neutral
“O” Position
(FIG 5)
.
• Plug into a properly grounded,
15 Amp outlet.
• Turn Rotary Switch to the desired
“L” [Low Speed] or
“H” [High Speed] position.
• Move Rocker Switch to the right
“ON” Position.
• Motor will begin to rotate. Allow ap-
proximately 10 seconds for Motor to
“spool up” to operating RPM before use.
#13542, 1/2 HP MOTOR
• Check that the Slide Switch is in the
down “OFF” Position
(FIG 6)
.
• Plug into a properly grounded,
15 Amp outlet.
• Move Slide Switch to the up “ON”
Position
(FIG 6)
.
• Motor will begin to rotate. Allow approxi-
mately 10 seconds for Motor to “spool up”
to operating RPM before use.
FIG. 5
Off On
FIG. 6
Rocker
Switch
Low
Speed
High
Speed
Off
✓
