background image

 

25

 

Cost of regular maintenance service or parts, such as filters, fuel, lubricants, oil 
changes, spark plugs, blade sharpening, worn blade, cable/linkage adjustments, or 
brake and clutch adjustments. 

 

Repairs necessary due to improper fuel, contaminants in the fuel system or failure to 
properly prepare the fuel system prior to any period of non-use over three months. 

 

Repair necessary due to failure to properly prepare the mower prior to any period of 
non-use. 

 

Pickup and delivery charges. 

All repairs covered by this warranty must be performed by an Authorized Eastman 
Service Dealer using Eastman parts. 

For more information concerning engine warranty refer to the enclosed engine manual 
and warranty statement…. 

OWNER’S RESPONSIBILITY 

The owner shall demonstrate reasonable care and follow preventative maintenance, 
storage, fuel and oil usage as prescribed in the owner’s manual.  Should a product 
difficulty occur, you must, at your expense, arrange to deliver or ship your Eastman 
Industries unit for warranty repairs and arrange for pick-up or return of your unit after the 
repairs have been made.  If you do not know the location of your nearest authorized 
Eastman Industries Servicing Dealer, call Eastman Industries at 1-800-760-1680 during 
normal working hours.  Repair parts and accessories replaced under this warranty are 
warranted only for the balance of the warranty period.  All parts replaced under warranty 
become the property of Eastman Industries. 

GENERAL CONDITIONS 

Repair by an Authorized Eastman Industries Dealer is your sole remedy under this 
warranty. 

Eastman Industries is not liable for indirect, incidental or consequential damages in 
connection with the use of Eastman Products covered by this warranty, including any cost 
or expense of providing substitute equipment or service during reasonable periods of 
malfunction or non-use pending completion of repairs under this warranty. 

 

 

 

 

Summary of Contents for WMS20-H


























Reviews: