background image

Eastman

Over a Century of Cutting Expertise

®

Form CR-50-0528

WARNING

Equipment Starts 

automatically - 

can cause severe 

injury

KEEP AWAY

779 Washington St., Buffalo, N.Y. 14203-1396 U.S.A. • (716)856-2200 • Fax (716)856-1140 or (716)856-2068

Manufacturers of Eastman Cloth Cutting and Cloth Spreading Machines

Website: www.EastmanCuts.com

THE EASTMAN

®

Cradle Spreading Machine

E-Series

Technical Support:

1-800-872-5595

Quick Start Guide

  

This machine is equipped with drive belts and 

roller tubes moving at high rates of speed. 

Keep hands, arms, and loose objects away 

from drive belts and rollers at all times.  

Misuse of this machine or failure to follow all 

safety instructions on this machine and in the 

instruction manual may result in serious per-

sonal injuries.

WARNING

Summary of Contents for E Series

Page 1: ...Spreading Machines Website www EastmanCuts com THE EASTMAN Cradle Spreading Machine E Series Technical Support 1 800 872 5595 Quick Start Guide This machine is equipped with drive belts and roller tubes moving at high rates of speed Keep hands arms and loose objects away from drive belts and rollers at all times Misuse of this machine or failure to follow all safety instructions on this machine an...

Page 2: ...ote Begin from step 10 if return power was not switched off Set the spread using Table End Teach or Spread Length Note When Table End is selected the machine will automatically use the Table End as endpoint To teach Spread Length press Teach manually drive the spreader to your start point and press End Spread Length requires entering a distance relative to the start position 7 Note Find Load End t...

Page 3: ...ically use the Load End to start To teach Start Position press Teach manually drive the spreader to your start point and press Start Offset From Home requires distance relative to the home position 11 s Settings m right corner unts then press Main again Along the bottom Manually set material to begin spreading and confirm Start Direction Press Change Direction if necessary 6 Note The Enter Length ...

Page 4: ...chine Also may be used to stop automatic spreading by twisting and releasing 5 Open Close Toggle to open close cradle 6 Main Power Activates the main power Twist right on twist left off 7 Main Display Touchscreen PC used for software and machine control 8 E Stop Emergency stop Push on twist off 9 Mirror Used to view the material in the cradle 10 Edge Control Sensor Detects the edge of the material...

Reviews: