Connecting Your Receiver to Your TV
Locate the coax cable going from the cable wall outlet to your TV (or other device).
Disconnect the coax cable from your TV (or other device). Take the coax cable that you
disconnected from your TV (or other device) and connect it to the CABLE-IN port on your
new receiver.
If your TV is HD compatible:
Connect one end of the HDMI cable provided with your install kit to the HDMI port on
the back of the receiver. Next, take the other end of your HDMI cable and connect it to
the HDMI port on the back of your TV. Make sure your TV settings are on the HDMI Input,
corresponding to the TV HDMI Input the receiver is connected to. See next page for a tip
on using the Input function.
1.
2.
3.
4.
If your TV is not HD compatible:
Connect one end of the Audio/Video Cables provided with your install kit to the
corresponding colour coded ports on the back of the receiver. Next, take the other end
of the Audio/Video Cables and connect it to the corresponding colour coded Audio/Video
ports on the back of your TV.
Finally, insert the power cord into the back of the receiver and insert the other end into
the electrical outlet.
Activate your receiver. See next page.
