Operation 29
Machine Adjustments
Following is a short outline of how the seven adjustments (five crank handle
adjustments and two internal adjustments) relate to the dimensions of the case blank
and resulting erected case:
Adjustment 1: Magazine Hopper adjustment for Case Width; the width of the case
minor panel, W.
Adjustment 2: Magazine Hopper adjustment for Case Length; the length of the case
major panel, L.
Adjustment 3: Top pusher adjustment for Case Height plus the Case Width; the
overall height of the case blank. W/2 + H + W/2, or simply H + W.
Adjustment 4: Box Baseline adjustment for Half of the Case Width; the width of a
case flap or W/2.
Adjustment 5: Taper conveyor width adjustment for Case Width; the width of the case
minor panel, W.
Adjustment 6: The sixth adjustment relates to the Case Length and Case Width. It will
be to adjust the location of suction cups on the case opener and where
they adhere to the case blank to swing it out and open, to distribute the
area of the box supported by each suction cup.
Adjustment 7: The final adjustment relates to the overall height and thickness of the
case blank. This adjustment is required to make sure one, and only
one, case blank is pushed into the case erector area for each cycle.
Be familiar with the adjustment cranks and how they move the parts of the machinery
they are responsible for adjusting. Be aware that it is possible to adjust the push-down
bracket and sensor mounting plate for magazine low/magazine empty in a way that the
pushdown bracket bar can crash into sensor mounting plates resulting in damage to
machine parts.
CAUTION: Before making the crank handle adjustments (1, 2, 3 &
4) it is important to look at the push-down brackets that will be
positioned in Adjustment 7. Before finalizing the crank handle
adjustments, make sure brackets are moved inward far enough
where intake belts will not crash against them while adjusting
intake belt width and alignment using the crank handles.
Taking care to inspect interaction of machine parts to verify that they will not interfere
with or crash against each other before cycling each step can help prevent incurring
repair expenses from broken or damaged parts.
Summary of Contents for ERX Series
