Operation 35
VIDEO: ERX-15 Case Erector Case Holdback Pin Alignment
To see a video to guide you through adjustment for alignment of the case
holdback pin, click this link:
https://www.youtube.com/watch?v=5cTzmXwu9DA
at right using the camera app on your mobile device.
The pin in the bottom plate below the case blank is instrumental in the opening and
expanding the blank as it is being erected. This pin holds back the trailing corner of the
case blank as the suction cups pull the leading sides of the case blank out, expanding
and forming the case. The pin must align with the slot in the bottom of the case blank
separating the bottom flaps for the leading sides.
1. With the case blank still in position in the staging area for the adjustments
described above, adjust hand cranks labeled 1 and 2 to move the case blank to
the left or right until the pin is in the proper position, as shown below.
•
Hand crank 1 adjusts the guide rails for the width of the minor panel, W.
•
Hand crank 2 adjusts the guide rails for the width of the major panel, L.
2. Be aware these adjustments use the same crank handles used to adjust the
magazine hopper for case blank size. For case blanks in the magazine hopper,
when the guide rails touch the box and the box is snug, loosen each of the two
crank handles only slightly — half a turn or less to provide adequate clearance of
1/32” to 1/16” to each side.
Summary of Contents for ERX Series
