18 Operation
•
While the magnets are holding the seal head down, it is not necessary to wait.
Prepare the next item to be sealed, placing it on the product tray between
upper and lower layers of film.
4. Once the seal is formed completely, the seal head automatically releases. The
sealed product is removed by the takeaway conveyor, and the next item can be
moved into position for sealing.
•
The takeaway conveyor runs for the specified amount of time required to
move the sealed product onward out of the sealing area. The amount of time
the conveyor runs is adjustable by turning the Conveyor Timer knob, which is
located to the right of the Power Switch under the product tray.
NOTE:
If there is too much tension on the film while the bag is being
sealed, the seals will be more likely to be weak or blow out in the
seal area while moving through the shrink tunnel.
