
Step #2-Monkey Bar Overhead 5’ Monkey Bars
Step #1- Monkey bar Upright 5’ Monkey Bars
Layout (2) M4478 Monkey bar
uprights and 3 15 1/8” monkey bar
rungs. Make sure angled cut sides are
facing in the same direction.
Measure from the bottom of the
uprights and make a mark as shown in
the drawing. Measurements are to
the center of the rungs. Install using
S1 screws. Repeat on opposite side.
Layout (1) M4478R and
(1)M4478L Monkey bar overhead
and 5 15 1/8” monkey bar rungs.
Make sure angled cut sides and
square sides are facing in the
same direction.
Measure from the bottom
of the uprights and make a
mark as shown in the
drawing. Measurements
are to the center of the
rungs. Install using S1
screws. Repeat on opposite
side.
Angled End
9
40X
Summary of Contents for 5' MONKEY BARS
