East ET 1205, Instruction Manual

Page: 11 / 37

C 3001 / ET1205
11
IMPORTANT TIPS:
1
，
Unit is fully assembled. Remove clear plastic blade guard before use and save it to use as blade-cover when unit is not in
use.
3
，
Battery must be charged before use. Please refer to battery charging instructions.
3
，
If the blade becomes jammed on a branch while cutting, IMEDIATELY release trigger and clear jam. If you continue to
hold trigger with blade jammed you will damage the motor.
4
，
IMPORTANT: This is a powerful tool that is remarkably easy and comfortable to use. As such, please pay attention to the
placement of the blades while using to avoid cutting yourself.

TECNICHAL SPECIFICATIONS
Type ET1205
Battery voltage DC 3.6V
Battery type Lithium-Ion
No load speed 1000rpm
Cutting length 110mm
Cutting width 80mm
Battery capacity 1.3Ah
Charging time 5Hours
Net weight
0.5Kg （ no
swivel handle
）
0.9Kg （ with
swivel handle
）
●
SAFETY INSTRUCTIONS
Please read these instructions before operating this product and save these instructions.
For safe operation:
1. Keep children and animals away from working area.
2. Switch on motor only when the hands and feet are away from the cutting blades.
3. Use only the manufactures recommended replacement parts and accessories.
4. When not in use, tools and batteries should be stored separately in a dry, high or locked up place, out of reach of children.
Ensure that battery terminals cannot be short-circuited by other metal parts such as screws, nails, etc.
5. Do not use excessive pressure during operation. It will do the job better and safer at the rate for which it was intended.
6. Dress properly
Do not wear loose clothing or jewelry; they can be caught in moving parts.
Wear stout shoes while using the grass shear. Wear protecting hair covering to contain long hair.
7. Maintain tools with care
Keep cutting tools sharp and clean for better and safer performance. Follow instructions for lubrication and changing
accessories.
8. Disconnect tools
Disconnect the tool from its battery pack when not in use, before servicing and when changing accessories such as
blades.
9. Avoid unintentional starting
Do not carry the tool with a finger on the switch.