9
3 Installation
3.1 Transportation or movement
Considering the outermost shell of this product being shield, the protective cover cannot be used as
the force bearing parts for transportation. It is necessary to pay attention to the following points, so
as to ensure the safety:
The batteries, battery cables, and other load cables can be placed separately during the
transportation or movement.
Prevent severe shock and impact, and handle gently.
Avoid placing the UPS upside down.
3.2 Unpacking inspection
Open the UPS package and inspect the contents upon receipt. The accessories attached
to the UPS contain an operation manual, an RS232 communication cable, a USB cable,
and a CD.
Check if the unit is damaged during transport. Do not power on and notify the carrier and
dealer if find damaged or parts missing.
Verify this unit is the model you want to buy. Check the model name showed both on the
front panel and rear panel.
Note: Keep the packaging box and packaging materials for reuse. The equipment is heavy. Always
handle it with care.
3.3 Installation
Due to the particularity of each site, this section only provides the qualified installation personnel
with the general installation steps and methods for guidance, instead of introducing detailed
installation steps. The installation personnel shall handle according to the specific situation of the
site.
Caution
The UPS ground wire shall be connected well during the electrical connection. Furthermore,
make sure to disconnect all switches before the completion of UPS installation.
The UPS installation shall be conducted by qualified engineers according to the
instructions of this chapter and local standards.
It is necessary to be extremely careful during the battery installation. If the voltage on both
ends of the battery exceeds 192VDC during the battery connection, it is in deadly danger.
Please wear an eye shield, so as to prevent arcs from hurting your eyes by accident.
Remove rings, wrist watches, and all metal objects. Use the tools with insulated handles.
Wear rubber gloves. If there is any battery electrolyte leakage or battery damage, replace
the battery, place it in the container which is resistant to sulfuric acid corrosion, and dispose
it according to local regulations. If the skin contacts with the electrolyte, rinse with water
Summary of Contents for 6KVA
Page 1: ......
