background image

 

 

1) 

QUALITY POLICY STATEMENT 

 
East  West  Engineering

  is  an  Australian  Owned  company  in  the  Sydney  suburb  of 

Brookvale.  We are Australia’s leading manufacturer of forklift attachments, storage, waste 
containers and environmental protection equipment. 
 

East  West  Engineering’s

  products  are  a  result  of  extensive  market  research  into  our 

customer’s needs. From the first concept to engineering certification and finally, CAD/CAM 
manufacturing, all our designs have been rigorously researched and developed. 
 
 

2) 

GENERAL DESCRIPTION OF PRODUCT 

 
The type CKM05, CKM10 and CKM15 Concrete Kibbles are suitable for bottom dumping 
or  side  discharge  (through  the  chute  provided),  of  concrete  or  equivalent  material.  The 
handle  positioning  each  side  of  the  kibble  for  right  or  left  hand  operation  allows  an 
unobstructed  view  by  the  Operator  of  the  material  pour.  The  chute  is  adjustable  from  its 
“Storage Position” to a pouring position 40

 below horizontal. The gate has been designed 

for a close fit around the kibble aperture. Forklift pockets have been provided for transport 
about  the  work  site  with  or  without  load.  The  interior  of  the  kibble  has  a  smooth  surface 
allowing for easy discharge and quick cleaning.  
 
The type CKM05 Concrete Kibble has a Working Load Limit (WLL) of 1500kg and a unit 
weight of 275kg with a capacity for 0.5 cubic metres of material. The type CKM10 Concrete 
Kibble  has  a  Working  Load  Limit  (WLL)  of  3000kg  and  a  unit  weight  of  320kg  with  a 
capacity for 1.0 cubic metre of material. The type CKM15 Concrete Kibble has a Working 
Load  Limit  (WLL)  of  4000kg  and  a  unit  weight  of  415kg  with  a  capacity  for  1.5  cubic 
metres of material. A painted enamel finish is standard on both types. 
 
Design of type CKM05, CKM10 & CKM15 Concrete Kibble attachments

1

 are in accordance 

with AS 2550.1 and AS 1418 where relevant. Use of the type CKM05, CKM10 & CKM15 
Concrete  Kibbles  are  restricted  to  the  purpose  for  which  they  are  designed.  EAST  WEST 
ENGINEERING is not liable if this restriction is breached. 
 
Some  attachments  are  manufactured  as  “Specials”  from  this  standard  product.  In  this 
situation, design changes may alter the operating procedures for the Special attachment

.

 

 
If your product type begins with the prefix “J”, it will be a Special. Please check with East 
West Engineering for non-standard instructions specific for your attachment. 
 

Note:

  The use of the words ‘

Forklift

’ & ‘

Industrial Truck

’ throughout these instructions 

both refer to ‘

Powered Industrial Truck

’ as defined in AS 2359.1.

   

 
 
 
 
 
 

                                                           

1

 Crane attachments cover the following Crane, Hoists and Winches.   Bridge, Gantry and Portal cranes, Tower 

static  and  mobile  Cranes.    Hoists  of  the  Chain,  Cylinder,  Scaffolding  and  Wire  rope  types.    Winches  of  the 
Creeper, Drum, and Trolley type. 

Summary of Contents for CKM05













Reviews: