![background image](http://html1.mh-extra.com/html/east-tester/et-2715/et-2715_user-manual_3438341014.webp)
11
circuit, allowing you to test a transmitter when it is disconnected from plant wiring. To
measure current with loop power, proceed as follows:
1.
Connect the calibrator to the transmitter current loop terminals as shown in
Figure 3.3-1.
2.
Press
until
and
appear simultaneously.
Figure 3.3-1
3.4 Frequency measurement
Press
to select frequency measurement, the connecting mode is same to that of
voltage. The screen will display as shown in Figure 3.4-1.