19
EASTOAK.COM
PYRAMID PATIO HEATER
TO TURN THE HEATER ON
WARNING: Ensure the glass tube is not damaged before use and assembly.
• Ensure the control knob is positioned to “OFF”.
• Connect the gas regulator to a propane gas tank.
• Push and turn the control knob to the “PILOT” position and hold for 60
seconds. While holding the knob down, press the ignition button until a pilot
flame appears.
• Once the pilot place sparks, let go of the control knob.
• Turn the control to knob to your desired temperature (lo or hi).
IMPORTANT NOTE
TO TURN THE HEATER OFF
•
When lighting the heater for the first time or if a new cylinder is connected:
◦ Get rid of the air inside the hose. This may take up to a few minutes.
◦ Press and hold control knob for at least 3 minutes instead of 1 minute.
This allows enough time for the air in the hose to pass.
• Turn the variable control knob to the “PILOT” position.
• Lightly press and turn the control knob to the “OFF” position.
• Turn the regulator knob to the “OFF” position.
