8
4.1.2 Universal worktable(see Fig. 2)
There is a hand-wheel (6)in front of the universal worktable with a 0.5 mm of scale
(10)to adjust the worktable height. The screws (8) and (9) is used to limit the height
adjustment range of the worktable. The screw (8) is to control the upper limit, and the
screws (9) for lower limit. The button (7) is used to lock the worktable to avoid from it
moving in vertical direction.
Fig. 2 Instrument main body structure
1. Base 2. Universal worktable 3.Balancing knob for worktable
4.5.Foundation screw 6.Lifting hand-wheel for worktable 7.Locking
hand-wheel for worktable Lifting 8.Top limit screw for lifting the worktable
9.Bottom limit screw for lifting the worktable
10.Height figured scale for lifting the worktable
11. Adjusting knob for worktable tilting 12 T
- slot
13. Locking knob for worktable tilting
14. Adjusting knob for worktable rotating 15. micro-active hand-wheel for worktable
16. Locking hand-wheel for siding carriage on the tailstock
17. Abbe measuring device 18. Dragline block for outer measuring force
19. Measuring spindle
20. Locking screw for the measuring spindle 21. meshing micro-active hand-wheel
for the measuring spindle
22. micro-active hand-wheel for the measuring spindle
23. Dragline block for inner measuring force
24. Front locking nut for the measuring spindle
Summary of Contents for EX-100
Page 4: ...3 Fig 3...