The Finishing Point, 222 Europa Boulevard, Gemini Business Park, Warrington, Cheshire, WA5 7TN
8
Security
The machine must only be used for the stapling and folding of
paper. Connect machine only to an earthed power outlet. Switch
off after use.
Make sure that the power requirement indicated at the machine’s rear side is
the same being provided on your premises before connecting the power cord.
Check function of safety shut off regularly: The machine must not run with
cover opened.
Clean and service the machine only with the power cord disconnected.
Place on an even support and never in a damp or humid surroundings, avoid
direct sunlight as this causes problems for the sensors and LED Screen.
Never put mugs, glasses or bottles onto the machine.
If you notice smoke, heat, excessive noises or any unusual performance,
disconnect the power cord immediately and call your TFP Service.
Technical data
Input paper sizes for booklets A5 (210 x 148.5) to SRA3 (320 x
450) Maximum booklet size
60 pages or 15 sheets 80gsm
paper Stapling heads
2, upgradeable to 4
Staple magazine
210 staples/stapling head
Staples/Loop Staples
EasiBook 26/6 (6mm leg
length)
EasiBook Ri 26/6 (6mm leg length, loop)
EasiBook 26/8S (8mm leg length, steel)
Cycle speed
User dependent up to 500 booklets/h
Power requirements
230 V AC 50Hz 100W
Weight (shipping weight)
39 kgs (42 Kgs crated)
Dimensions (H x W x L)
290mm x 490mm x 510mm
Shipping dimensions
420mm x 680mm x 600mm
Accessories
Stand on Casters (Special Order)
Additional stapling heads
Original EASIBOOK-
Staples
