The Finishing Point, 222 Europa Boulevard, Gemini Business Park, Warrington, Cheshire, WA5 7TN
7
Trouble Shooting Cont….
Booklets are being stapled or folded incorrectly
The side guides (10, 11) or the back stop
(14) are not fixed correctly or at skew
position.
Fix the locking screws of the side guides
and back stop properly. Adjust skew as
necessary.
The side guides (10, 11) are too far apart
from each other, allowing unparalleled
insertion of paper:
Shift side guides more closely together.
The side guides (10, 11) are adjusted too
tightly, causing larger paper formats to
curl during folding which leads to
incorrect stapling.
Shift side guides further apart.
Incorrect adjustment of back stop (14):
Adjust back stop more precisely, so that
the machine folds in the center of the
Sheet.
Paper is not squared up correctly:
Square up paper correctly before firing.
Use Skew.
Booklet is stapled correctly but incorrectly ejected
Reduced stickiness of fold rollers because
of dirt:
Clean fold rollers with TFP SC2
Thoroughly and re-try
Too many sheets have been inserted:
Do not insert more than 15 sheets 80GSM
or 1,200 gsm total.
Maintenance
Replace scratched or bent driver blades (16). Clean the machine only with a
soft lint free cloth, very slightly damp, do not use chemical substances on the
outer frame or buttons.
Clean the folding rollers using a rubber friendly chemical, we recommend you
use our specially formulated TFP SC2 – Do not use rubber rejuvenator.
It is imperative you keep the rollers clean to ensure perfect operation and
correct folding. Clean the rollers regularly.
