*Figure
②
Installation position
of push rod linkage on the footrest.
*Figure
①
Installation position
of the foot machine.
Step 2
Installation of Foot Massager
Installation of Remote Control Bracket
Manual screw
Chair Installation
Installation Guideline
I, Installation of Foot Massager
1, Align the foot machine with the connecting holes on both sides of the seat and
insert rivets and plug. * Figure
①
2, Use rivets and plug to dock the seat bottom putter with the foot machine
putter. *Figure
②
3, Install air bags into the air inlet connector (TWO connectors) which must be
connected with the corresponding colors and fix with wire hardness. Then connect
THREE wires, and use the zipper cloth to cover after connecting.
4, Connect the seat cushion to the zipper on the footrest.
1, Use the M5 L-shaped hexagonal
wrench to lock the Hand-controlled
hexagon nut to the remote control
bracket.
2, The mobile phone holder and its
cover are attached to the remote
control bracket by using 4x16 round
head flat tail screw.
3, Use manual screw to fix the
control box seat
4x16 round head
flat tail screw
Hand-controlled
hexagon nut
Step 3
8
