中国·厦门蒙发利科技集团有限公司
Xiamen Comfort Science &Technology GROUP Co., Ltd
E
：
Cut the cable ties then disconnect the connecter on the width inspection board.
F
：
Take off the four screws which fix the massage mechanism.
G
：
Turn the wheel to adjust the roller to narrow position, then take off the massage mechanism.
H
：
Take off the four screws to separate the tapping motor and the massage mechanism. Then
we can take off the massage mechanism.
7
：
Disassembly of the
up & down stroke photo-electricity.
A
：
Take off these four screws, then we can take the rear cover off.
B
：
Use a screw driver to turn the rolling motor, make sure the magnet not block the up stroke.
The screws fixing the mechanism
The four screws that fixing
the tapping motor
The position of the four screws
Rear cover has been taken off
