E: With help of long nose pliers we can pull the 4 inflator pump supporter out of the baseboard. ( As picture below
show.)
打开电源，将小腿伸直最高，取下前挡布上的
7
枚螺丝，取下前挡布，可以看到里面的推杆
Turn on the power,raise up the leg rest,take down the 7 screws fixing the cloth,then you can see the actuators inside
6.
靠背电动推杆的拆卸
Disassembly of the reclining actuator
①
用斜口钳取出靠背电动推杆的开口销
Romove split pin, draw out flat head rivet securing the reclining actuator on the U stay fork and remove the flat
head rivet.
②
取出推杆两端的销轴
Remove the guard cloth under the foot rest, then one end with a motor of the actuator can be found. Romove split
pin, draw out flat head rivet securing the reclining actuator on the base frame and remove the flat head rivet. Take
care not forget the bush ring.
Flat head rivet securing the reclining
actuator on the U stay fork
Flat head rivet securing the reclining
actuator on the base frame
Backrest actuator
Footrest actuator
Grip the supporter and pull it out.
