10
电机滤波器的拆卸
Disassembly of the electric filter of the motor
①
将机芯停留在靠背顶部，取下靠背后盖
Release the stopper at the bottom of back rest, turn down the back
rest forward. Disassemble the rear cover.
②
可以在机芯底部找到滤波板的盒子
You can find a box of the filter at the bottom of the massage mechanism.
③
用斜口钳剪开固定线材的扎扣
Cut the cable ties tightening the wires on the sheet-metal with wire cutters.
④
取下固定滤波板器盒子的
4
枚螺丝
Slacken and remove the screws tightening the upper and lower cover of the box.
⑤
取下固定滤波板的
2
枚螺丝
The PCB and lower cover are fixed to the sheet-metal
with 2 pieces of screws. Slacken and remove the screws.
⑥剪掉
2
条焊接于滤波板的线材，可以更换滤波板
If the PCB fails, cut the wires and cable ties tightening the wires, then
replace a new one. Then connect the wires and secure it with line insulators.
⑦逆序装回（剪掉的线材可以用压线冒或电脑铁接上）
Proceed in the reverse order of disassembly when assembly.
工具
Tool:
一把十字螺丝刀
a plus screwdriver
固定线材的扎扣
Cable ties tightening the wires
固定滤波板的两枚螺丝
The PCB and lower cover are fixed
to the sheet-metal
固定滤波板盒子的
4
枚螺丝
Screws tightening the upper and
lower cover ST3*8 4PCS
