Easee Ready, User'S Installation Manual

Page: 3 / 18

3
The Easee Ready includes a backplate and a blind
cover. By installing it you can extend your charging
infrastructure at any time in the future. This is easily
done with the Easee Plug & Play product by mounting
the new Chargeberry in the empty Easee Ready
backplate without the need of an electrician.
Intended use
This product is intended solely as a prepared charging
point for an Easee Charging Robot.
The product must be firmly mounted on a wall or
structure that covers the entire back side of the product
and has a sufficient load-bearing capacity. It may only
be operated with the approved operating parameters
and under the specified environmental conditions (see
page 4).
Uses other than those specified here are not permitted.
Conventions
This symbol indicates that the respective
instructions must only be carried out by an
authorised electrician.
This symbol indicates an immediate danger to
life and health of individuals due to the effects
of electrical energy. Non-observance of these
instructions will result in serious damage to
health – up to and including life-threatening
injuries.
Introduction