3
Eastron SDM120CT-RJ12
Measurements (mm): H:118 x W:18 x D:64
Voltage: 230V ac
Network frequency: 50/60Hz (± 2%)
IP-classification: IP51
Running temperature: -25°C - 55°C
Primary connection: 2,5mm2
Current Input: RJ12 CT Clamp
Output connection: RJ12 6P6C
Mounting: DIN-rail
Material: Self-extinguishing UI94 V-0
ESCT-TU16-RJ12-100A
Max Primary Current- 100A
Secondary Current - 100mA - RJ12
Cable Length - 3m
Measurements - 31.50mm x 29.00mm x 45.50mm
Diameter - 16mm
Running Temperature - -15C - +60C
RJ12 cable
Length: 1.5m
Connector plug: RJ12
Lead cable: 6 pin
Technical specifications
WARNING!
This product shall only be installed,
repaired or serviced by an suitable competent
and qualified electrician. All applicable local,
regional and national regulations for electrical
installations must be adhered to.
—
Please check the safety instructions on
the manufacturer’s user guides for all the
components of the kit.
— Make sure you have enough space on the DIN
rail for all the components. Minimum required
space is 36mm or 2 Modules
— The cable from the meter to the Equalizer
can be extended up to 200m. Please use
appropriate specification of cable for
installation method.
— Ensure the Equalizer and the master
charger(s) will be connected to the same WiFi
network. The Equalizer requires connection to
a suitable and secure wifi network to ensure
correct operation.
—
CT Clamps and Rogowski Coils must be fitted
in the correct orientation to read incoming
power line.
— 6A Single Pole Fuse
— Install the Easee Installer App on your phone
by using the QR code below.
Before you start
