2
3
4
5
6
7
8
9
11
Max Power Voltage
Picture
Lamp Cap ILCOS D code
Square / Diameter
: 33.2mm x 120mm
1.5W
DC 12 V
——
DSS-1.5-S-33.2
/120
•
Press LED light on the front of front plate,
install the LED light on the front plate.
•
Connect the terminal of LED light and light
leads.
•
Carefully fasten the 2 screws on the front
plate ,reinstall the grease filter.
35
V.1
•
Before changing the light module(s), unplug
the appliance from the mains or switch off
the circuit breaker in the fuse box.
•
Remove the grease filter and carefully
remove the 2 screws from the front plate (a
cross headed screwdriver will be needed to
remove the screws).
•
Disconnect the terminal of LED light.
•
Press LED light on the back of the front
plate, take the LED light out.
•
Replace the lamp(commercially available
LED lamp (max.1.5w).
