WHAT TO DO BEFORE CALLING FOR AUTHORIZED SERVICE
Failure
Possible Solution
Result
If the cooler does
not operate (No
noise or just the
fan noise)
It may be caused by
the thermostat. It
may be unplugged.
Fuse may be blown
or faulty. Condenser
fins may be dirty or
clogged.
It shall operate again
when it reaches the
proper temperature.
Plug it correctly.
Consult an EAS
Electric authorized
service or a qualified
electrician.
Internal
temperature of
the appliance is
high
Ambient
temperature is very
high or thermostat
setting is incorrect.
Rear part is very
close to the wall,
ventilation blinds
are blocked or its
front is covered. It
may be exposed to
excessive external
wind. Condenser
fins are very dirty
Take your cooler to
a place where
ambient
temperature is
lower. Bring it to
specified clearance.
Clean the front of
the ventilation
blinds. Prevent
wind. Clean the
condenser fins.
Internal
temperature of your
appliance is very low
Wrong internal
thermostat
setting
Reset the
thermostat.
Lamps of your
cooler does not
illuminate or only
one lamp illumi-
nates.
Lamps are turned
off. Lamp has burnt
out or the starter is
faulty.
Turn the lamps on.
Replace the faulty
part.
24
V.1
