3. INSTALLATION METHOD
Fig 3-4
Fig 3-3
Connect the female joint of wires group from the mainboard with
the male joint of connective wires group. (See Fig.3-3)
Please connect the other side of connective wires group with the
male joint of wires group leads from wire controller. (S ee Fig.3-3)
Mainboard
4-core shielding wire
3.Wiring figure
4.Remove the upper part of wire controller
Connective wires group-1
Connective wires group-2
CN40
Insert a slot screwdriver into the slots in
the lower part of the wire controller (2
places), and remove the upper part of
the wire controller. (Fig.3-4)
Slots
NOTICE
The PCB is mounted in the upper part
of the wire controller. Be careful not to
damage the board with the slot
screwdriver.
39
V.2