E T X T S O L I T H I U M B A T T E R I E S
12
Fault Monitoring Connection to Garmin EFIS
Configure the digital input (contact input) as “active low”, “user defined alert” type.
Fault Monitoring Connection to 24V LED
Connect the LED’s red wire to a spare or existing fuse or breaker off the electrical bus. Use
any .25 Amp to 2 Amp fuse or breaker. Connect the LED’s white wire to aircraft ground.
The black wire is to be connected to the battery’s fault output (black wire), using a male ¼”
quick connect terminal.
