PRODUCT SPECIFICATIONS
0.065 Single Line
-
Automatic Feed
-
Edging Function
-
Adjustable Cutting Head
FEATURES
LST02010
Input
….………………………….……………………...
20V, DC Only
Battery
………………………………….…....20
V 2.0 Ah Lithium
-
ion
Speed
………………………..….....................................
9000 RPM
Cutting Width
………………………………………………........10
in.
Weight
………
.
………………………………………............. 4.2
Ibs.
No.
Description
No.
Description
1
Handle
7
Protection Guard
2
Lock
-
Off Button
8
Trimmer Head
3
Switch Trigger
9
Auxiliary Handle
4
Locking Collar
10
Battery Pack
5
Adjustable Cutting Head
11
Charger
6
Edge Guide
ASSEMBLY
UNPACKING
This product requires some assembly.
PACKING LIST
•
String Trimmer
•
Protection Guard
•
Auxiliary Handle, Wingnut, M6x80 Bolt
•
Battery Pack
•
Charger
•
Instruction Manual
WARNING:
Do not install battery until assembly is complete.
Failure to comply could result in accidental starting and
possible serious personal injury.
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
Carefully remove the product and any accessories from the box.
Make sure that all items listed in the packing list are included.
Inspect the product carefully to make sure no breakage or damage
occurred during shipping.
Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call 1
-
800
-
313
-
5111
for assistance.
ATTACHING THE PROTECTION GUARD
WARNING:
Do not operate the trimmer without the guard attached.
Slide the protection guard (A) as shown below in the direction of the
arrow onto the motor housing (B) until the latches lock in firmly.
Remove blade cover (C) on guard before use.
ATTACHING THE AUXILIARY HANDLE
Position the auxiliary handle (A) so that the holes are in alignment
with the holes in the handle support bracket (B).
Insert the M6X80 hex head bolt (C)
into the hex shaped bolt hole of the
bracket. Secure by tightening the
wing nut (D) onto the bolt (C).
Loosen the wing nut and adjust the
angle and height of the handle (A) to
a safe and comfortable position.
Secure into place by tightening the
wing nut (D) onto the bolt (C).
3
Model LST02010
C
A
B
C
D
