18.
Tension on the flow control lever may be adjusted by
tightening or loosening the tension nut as shown.
WARRANTY
EARTHWAY guarantees this product to be free of defects in
original workmanship and materials for a period of 90-days
from sale to the original user. If any defect develops during
this period EARTHWAY will repair or replace this product at
no charge provided the defect is not the result of mishandling
or tampering and that this product is received at the factory
with shipping charges prepaid. For quicker service you may
call EARTHWAY at
574-848-7491
or write and describe the
nature of the defect and we will send repair parts to you. Due
to the corrosive nature of most fertilizers and ice melters,
EARTHWAY PRODUCTS, INC. makes no warranty or guar-
antee against corrosion failure on models with plated steel or
painted steel frames. Clean and dry your spreader thoroughly
after each use. Warranty covers parts only, not any labor
charges to repair or replace those parts.
PAGE 5
The settings furnished on the Rate Setting Chart are intended as
a guide only. Variations in physical characteristics of material
applied, walking speed, and roughness of ground surface may
require slightly different spreader settings.
Due to the above conditions, EARTHWAY PRODUCTS, INC.
makes no warranty as to the uniformity of coverage actually
obtained from the settings listed.
OPERATING INSTRUCTIONS
Before filling hopper, become familiar with the operation of this
spreader.
Obtain proper setting for material to be used from the RATE
SETTING CHART included with this spreader.
Move stop bolt on rate gauge assembly to the proper setting.
While pushing spreader forward, pull control lever back to
stop bolt.
To stop, push lever forward to close flow holes before you
stop moving.
When finished, empty any remaining material from hopper.
Thoroughly wash spreader and allow to dry before storing.
No oiling is necessary.
Remove agitator when using Rock Salt to prevent gearbox
damage.
D
O
N
OT
R
ETURN
T
O
D
EALER
F
OR
R
EPAIR
EARTHWAY PRODUCTS, INC.
1009 Maple Street
P.O. Box 547
Bristol, IN 46507
FOR YOUR RECORDS
Date Purchased
Store Name
HOW TO ORDER SPARE PARTS
All spare parts listed herein may be ordered direct from the
manufacturer,
EARTHWAY PRODUCTS, INC.
Be sure to
give the following information when ordering.
1. Model Number
2. Part Number
3. Part Description
Call (574) 848-7491 or 800-294-0671 or write for current prices.
