Assembly and Operation Instructions
90308_M52169_December2023
PAGE 5
OPERATING INSTRUCTIONS
Obtain proper setting for material to be used from the material label.
Turn the switch to OFF and install
DeWalt
TM
battery into the BATTERY ADAPTER.
To activate the front boom sprayer, turn the RED LEVER
vertical
and the switch to ON.
To activate the sprayer wand, turn the RED LEVER
horizontal
and the switch to ON.
Spray some liquid back into the tank to flush the wand and ensure even spraying.
To change the spray pattern, turn the NOZZLE on the spray wand.
When finished spraying, REMOVE the battery from the adapter.
DO NOT spray any liquid near the BATTERY ADAPTER.
CLEANING
After
every
use, THOROUGHLY clean out the sprayer tank with water.
Flush the sprayer wand and hose with water.
Soap may be used but harsh cleaning chemicals can cause damage to sprayer parts.
Store in a cool and dry environment.
Before temperatures drop below freezing, make sure the connection hose is detached from the spray boom and no
residual moisture is present in the hose, spray wand, spray nozzle, or tank.
WARNINGS
WARNING: Cancer and Reproductive Harm
–
This product can expose you to chemicals contained in steel and stainless including nickel and chromium, which are
known to the State of California to cause cancer, birth defects, and or reproductive harm.
WARNING: Hazardous Chemicals
This sprayer contains NO hazardous liquid chemicals; however, the operator may be using hazardous chemicals in
the sprayer. Do not inhale, ingest, or touch such chemicals. When using hazardous chemicals, use safety glasses and
gloves to protect the eyes and skin. Read the chemical labels carefully to ensure safety.
