Assembly and Operation Instructions
2050TP Manual 2023update 08082022
PAGE 2
ASSEMBLY INSTRUCTIONS
Step 1:
Remove all components and hardware items from the box. Place the hopper upside down with the front of
the hopper facing away from yourself. (Lower frame and tires are already installed)
Step 2:
Take the control support (key #8) and place it under the wire brace (key #11) so that the wire brace rests on
the control support. Make sure the control lever is facing down and the hitch plate is facing up.
Step 3:
Using nuts (key #6) and bolts (key #7), attach the control support to the cross braces.
Step 4:
Once that is secured take the brace clip (key #10) along with bolt (key #7) and nut (key #6) to attach the wire
brace to the control support.
Hitch support is at the top.
Control assembly is at the
bottom
Attach control support to
middle of cross braces
Wire brace sits on top of
the control support.
Place wire brace inside the
brace clip then secure with
#7 bolt and #6 nut.
