BALTECH AG
Lilienthalstrass<e 27
85399 Hallbergmoos
Germany
Phone:
+49 (811) 99 88 1-0
Fax:
+49 (811) 99 88 1-11
Mail:
Website: www.baltech.de
v1.0
ACCESS200 installation guide
Here’s a quick overview of the steps to install an ACCESS200 reader
. More detailed
instructions are available online
–
just follow the links or QR codes below.
1.
Install readers
Mounting guidelines:
•
Fix the base part to a single gang box or directly to the mounting surface.
Use 3 mm diameter countersunk head screws. Heads must not stand out more than
1 mm from the base surface.
•
When using stranded wires, make sure there are no wires outside the cages of the
pluggable cage clamp.
•
To avoid rain interference, make sure outdoor keypad readers are mounted upright or
at a protected spot. Otherwise, ensure
they’re wiped off if malfunctioning.
Connector and pins:
Pigtail cable connection / Molex Pico-SPOX (outdoor/potted
versions) stranded, AWG28, power Red&Black AWG 24
Color
Connector pin #
Signal/funct.
White/Orange
1
WIE_D0/RS485A
Orange
2
WIE_D1/RS485B
White/Green
3
LEDGN
Green
4
LEDRD
Red/White
5
USB Data -
Black/White
6
USB Data +
Red
7
+VIN
Black
8
GND
White/Blue
9
GND
J8 Pluggable cage clamp
(indoor versions)
Pin #
Signal/funct.
J8-1
GND
J8-2
+Vin
J8-3
WIE_D0/RS485A
J8-4
WIE_D1/RS485B
J8-5
LEDGN
J8-6
LEDRD
J8-7
REL_WC
J8-8
REL_NO
