manualshive.com logo in svg

EarthWalk eBuddy EB14-RY, User Manual

Share
Download
EarthWalk eBuddy EB14-RY User Manual Download Page 39

Chapter 3 

— Power Management

 

When to Replace the Battery 

Over time, the battery's capacity gradually decreases. We recommend 
that you replace your battery when you notice that it begins to store 
significantly less charge. 

Changing the Battery 

Change the main battery pack as 
follows: 

1.  Turn off the computer.  

2.  Close the screen cover and turn the 

computer over. 

3.  Slide the battery latch away from the 

battery. Continue to hold it until the 
battery is removed. 

4.  Remove the battery. 

5.  Make sure the replacement battery 

is properly orientated. Insert the 
battery into the battery compartment. 
Check that the latch locks back into 
position. 

 

 

 

 

Heat Considerations 

The computer's processor has been specially designed to consume 
little power, and generates very little heat. However, working in a hot 
environment, or working for long periods may raise the temperature. 
Your computer takes the following steps to lower temperature: 

1.  The cooling fan will automatically turn on. You may feel air coming 

from a vent at the left side when this happens.  

2.  If the temperature continues to rise, processor activity will be 

reduced. You may notice a slight loss of performance when this 
happens. 

 

 

 

 

36

Summary of Contents for eBuddy EB14-RY

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands