background image

 

ENGLISH 

Chapter 2

 — Getting Started 

  Do not bend or drop the discs. 

  Do not place objects on top of discs. 

 

Warning: 

Do not insert any 

foreign objects into the 
disc tray. Do not force 
the tray to open or close 
manually. When not in use, 
keep the tray closed to 
prevent dust or dirt from 
entering the drive unit. 
If you experience 
difficulty when removing a 
CD disc, stretch a paper 
clip (or use a pin or a 
thin metal rod) and insert 
it into the emergency 
eject hole located on the 
front panel:

 

 

 

The CD disk tray should eject immediately. This 
procedure can also be used to remove a CD from the 
drive when the notebook is powered off.

 

Connecting the Printer 

To connect a printer to your notebook via the USB port, use the supplied 
USB to printer adapter cable. 
 

 

Note:

 Before use, you must install the driver for 

the adapter cable.

 

 

The PC Card Slot 

The PC card slot can be used as an interface between your computer and 
a variety of communications devices, such as network adapters, SCSI 
adapters, fax/modems, or provide additional data storage capacity. Your 
computer's PC card slot

 

supports PCMCIA Type II, 32-bit CardBus, and 

Zoomed Video cards. 

26 

Summary of Contents for eBuddy 7.2














































































Reviews: