manualshive.com logo in svg

EarthWalk eBuddy 6.8, User Manual

The EarthWalk eBuddy 6.8 User Manual is your comprehensive guide to maximizing the potential of this innovative device. With step-by-step instructions and helpful illustrations, this manual is available for free download from manualshive.com. Unleash the full potential of your eBuddy 6.8 with this invaluable resource.

Share
Download
background image

E

N

G

L

IS

H

 

System Software

 — System Recovery 

System Recovery 

Before you start 

Your system includes Recovery CD-ROMs. Follow the steps in the 
appropriate section below to reinstall the operating system, the system 
software, or add a new hard disk. 

•

 

The factory has pre-partitioned your system's hard disk, so you 
may directly install the system software; however, if you change 
a new hard disk, you must first partition it. 

•

 

If you reinstall your operating system, all of the data 
originally on the hard disk will be overwritten. Before 
reinstalling the operating system, carefully backup any 
important data. 

•

 

Your system is shipped with Recovery CD-ROMs. Before 
reinstalling, note the CD-ROM labels. 

 

 

Caution: 

When you re-install operating system by 

Recovery CD for Windows, we 

STRONGLY 

recommend 

connecting the AC adapter

（

 do NOT use battery 

alone 

）

to avoid warning message.

 

43 

Summary of Contents for eBuddy 6.8
















































































Reviews:

No comments

Related manuals for eBuddy 6.8

Brands by name

Popular brands

Load more brands