Specifications are subject to change without notice.
XJ-700DSP Manual 9
The XJ-700DSP has two speaker output terminals. A
subwoofer can be connected to either SUB 1 or SUB 2.
The same amount of power will be produced from
either terminal.
In case the subwoofer becomes out of phase with the
rest of the system, adjust the phase shift to correct
the problem. Note that maximum bass is only
achieved when the sub is in phase with the speakers
in your system.
To Power 1THOR IW-SUB10 or 1 Q10BTransducer
THOR IW-SUB10 In-Wall Subwoofer
Q10B Tactile Transducer
+
+
XJ-700DSP
XJ-700DSP
Connecting Your XJ-700DSP
