background image

Operator's Manual

WE43 Series Walk-Behind Edger

Check for parts online at 

www.getearthquake.com

 or call 800-345-6007 M-F 8-5

7

SAFETY SYMBOLS AND DECALS 

This edger has been designed and manufactured to provide you with the safety and reliability you would expect from an industry 

leader in outdoor power equipment manufacturing.

Reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate this 

equipment safely and effectively. We have placed safety decals on the edger to remind you of some of this important information 

while you are operating the unit. These important safety decals are illustrated below, and are shown here to help familiarize you with 

the location and content of the safety messages you will see as you perform normal edging operations. Please review these decals 

now, and if you have any questions regarding its meaning or how to comply with these instructions, reread the complete safety 

instruction text in this manual, or contact your local dealer.

Should these decals become unreadable because of being worn, faded, or otherwise damaged during the use of your edger, please 

use the part number information provided to order a replacement label from your local authorized dealer. These decals are easily 

applied, and will act as a constant visual reminder to you, and others who may use the equipment, to follow the safety instructions 

necessary for safe, effective operation of your edger.

The following symbols and decals may be used on your engine to alert you to potential hazards or to give you guidance in operating 

your edger.  Look over them and understand their meanings before operating your edger.

Fire hazards

Wear eye protection

Shock hazard

Hot surfaces

Toxic fumes

Moving parts

Read manual before operation

Slow

Fast

Fuel

Oil

Choke

On/Off

Fuel Shutoff

C

G

Operational Control Symbols

Safety or Hazard Symbols

Hot!  Do not touch!

Company:

   Ardisam

Part No: 

 10691

Description:

   ARTWORK WARNING MOVING PARTS

Type:

  

Decal

REV:

  

1

Born:

  

12-06-11

ECN No:

  

9159

Support File:

  -

Artist:

  

Amanda Rose Buffington

Notes:

  

-

F00900

      |      Approved by Scott Andrew Waldal      |      Date:  030411                                    

Revision 01

      |      Revision Date:  071411      |      File Name:  PN-REV1a-010101-lt

Colors Used:

  

TO GUARD AGAINST INJURY OBSERVE THE FOLLOWING:

●  Do not operate without guards in place

●  Stay away from blade guard and rotating blades

10689

DIRECTION OF ROTATION

Pantone

Process Black

Pantone

1797

Part No. 10689

BLADE SAFETY 

PRECAUTION  DECAL 

Warning: Moving Parts

Do not operate without 

guards in place

Part No. 10686

SAFETY PRECAUTIONS DECAL

1) Wear eye and hearing protection

2) Read entire manual before operating product

3) Watch for bystanders 

4) Blades rotate clockwise when edger is in use.  NOTE:  When throttle is released, blades stop

Company:

   Ardisam 

Part No: 

 10688

Description:

   ARTWORK HEARING GLASSES SPEED

Type:

  

Decal

REV:

  

1

Born:

  

12-06-11

ECN No:

  

9159

Support File:

  -

Artist:

  

Amanda Rose Buffington

Notes:

  

-

F00900

      |      Approved by Scott Andrew Waldal      |      Date:  030411                                    

Revision 01

      |      Revision Date:  071411      |      File Name:  PN-REV1a-010101-lt

Colors Used:

Pantone

Process Black

10686

1

2

3

4

Summary of Contents for WE43





























Reviews: