4
Earthquake Sound Corp. | (510) 732-1000 | www.earthquakesound.com
5
Specifications are subject to change without notice.
1) Read these instructions in their entirety.
2) Store this manual and packaging in a safe place.
3) Heed all warnings.
4) Follow instructions (do not take shortcuts).
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatuses that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the
other. The grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for
your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11) Only use attachments and accessories specified by the
manufacturer.
12) Use only a compatible rack or cart for the final resting position.
13) Unplug this apparatus during lightning storm or when unused for a
long period of time.
14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in a way such as:
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
15) To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
Safety Instructions (continued)
Unpacking System Components
• Keep the original carton and packing materials for future shipment or
storage.
• Check for any visual signs of damage. If you encounter any concealed
damage, consult your Earthquake Sound dealer before proceeding
with unit installation.
• Retain the sales receipt as it establishes the duration fo the limited
warranty and provides information for insurance purposes.
System Installation Considerations
There are several factors to consider before installing Earthquake
Sound’s iQuake-52.
• What are the intended listening zones?
• What system options and accessories might be required for features
such as local sources, etc.?
• From where in each zone will the listener prefer to control the system?
Where will the remote gains be located? Where will the speakers be
located?
• Where will the source equipment be located?
Connection Tips
• Keep all power cords away from all signal cables to prevent humming
from induced noise.
• Choose reliable signal cable cords (Earthquake Sound also specializes
in high performance RCA cables and patches).
• All speaker wires that are ran through the walls should be twisted type
to reduce potential hum noise pick-up.
• Label both ends of all wires with the corresponding room location.
• It is best to use a grounded electrical outlet to power the amplifier.
Lack of input ground reference could be unsafe. Consult with your
electrical contractor about proper grounding.
